The “Bypassing of communications” plugin allows you to easily bypass communications from your model to other communications from both your model and a related model.
We run the plugin
Next, we select the communications we want to change and click “Done”.
Next, you will see a pop-up window where you need to answer a question. Is the communication you want to bypass in the current model or in a linked model? Click on the “Yes” or “No” button. Then choose the communications that you want to bypass in the current or linked model and click “Done”.
Finally, you will see the following window where you need to set the following settings.
1. We select whether we are going to bypass vertically or horizontally.
2. Select which way the traversal should be performed. Bypass from above/ Bypass from below.
3. Specify the Z or Y length value. See the image on the left for what these parameters are.
4. Specify the offset angle.
5. Specify the value of X.
6. We press ready and the communications perform the traversal.
Be careful when setting the dimensions, because the wiring depends on the dimensions and settings of the connection families!
Comments